Factory wholesale Small Metal Gear - Sintered customized sector gear – Jingshi

Product Description Technology: Powder Metallurgy Surface Treatment: Quenching, Polishing Material Standard: MPIF 35, DIN 30910, JIS Z2550 Density: 6.2 - 7.1 g/cm3 Macro Hardness: 45-80 HRA Tensile Strength: 1650 Mpa Ultimate Yield Strength(0.2%): 1270 Mpa Ultimate Size: Customized Size Customized complex structure powder metallurgy gears, density, technical requirements are fully customized. OEM powder metallurgy gears The Advantage of Powder Metallurgy Process ①Cost effective The final products can be compacted with powder metallurgy method, and no need or can shorten the processing of machine. It can save material greatly and reduce the production cost. ②Complex shapes Powder metallurgy allows to obtain complex shapes directly from the compacting tooling, without any machining operation, like teeth, splines, profiles ,frontal geometries etc. ③High precision Achievable tolerances in the perpendicular direction of compacting are typically IT 8-9 as sintered, improvable up to IT 5-7 after sizing .Additional machining operations can improve the precision. ④Self-lubrication The interconnected porosity of the material can be filled with oils, obtaining then a self-lubricating bearing: the oil provides constant lubrication between bearing and shaft, and the system does not need any additional external lubricant. ⑤Green technology The manufacturing process of sintered components is certified as ecological, because the material waste is very low, the product is recyclable, and the energy efficiency is good because the material is not molten.